Best Bluetooth Car Amplifiers [UPDATED]

Home >> Car Amplifiers >> Best Bluetooth Car Amplifiers [UPDATED]

The main difference between a Bluetooth amplifier and other car amplifiers is that you can stream music directly into it from all your Bluetooth-enabled devices.

A Bluetooth car amp simply rules out the need for buying a head unit saving you several bucks in the process. The following picks are the top in the market in terms of quality features and durability.

Car Bluetooth Amps We Recommend

ImageBluetooth Car AmplifierRMS PowerPeak PowerNo. ChannelsAmp ClassBuilt-in Bluetooth
KENWOOD KAC-M5024BT Compact...
4-Channel Pick

Price at AmazonPrice at Crutchfield
@4Ohm: 50 watts RMS x 4
@2Ohm: 75 watts RMS x 4
Bridged: 150W x 2
150 x 44 channelsClass DYes
Power Acoustik RZ5-2500D 2100W...
5-Channel Pick

Check Price
@ 2Ω 150W x 4 + 600W x 1;
@ 4Ω 100W x 4 + 400W x 1;
Bridged @ 4Ω 300W x 2 + 600W x 1 (2Ω)
2,500W5 channelsClass DYes
Massive Audio TX48-200 Watts x...
Top Notch

Check Price
@2 Ohm 400W x 4;
@4 Ohm 200W x 4;
@4 Ohm Bridged 800W x 2
1600 W4 channelClass DYes
Soundstream ST4.10000D Compact...
4-Channel Budget

Check Price
@ 4 ohms 90 watts x 4;
@ 2 ohms 125 watts x 4;
bridged @ 4 ohms 250 watts x 2
1000 W4 channelClass DYes
4-Channel Pick

Kenwood KAC-M5024BT

Power: 50 watts RMS x 4 (@4Ohm, 14.4V, 20Hz-20kHz, ≤ 1.0% THD+N);
@2Ohm: 75 watts RMS x 4 (@2Ohm, 14.4V, 20Hz-20kHz, ≤1.0% THD);
Bridged: 150W x 2 (@4Ohm, 14.4V, 20Hz-20kHz, ≤1.0% THD)
Class: D
Channels: 4

Kenwood KAC-M5024BT 4-channel amp is our bang-for-the-buck option because of its advanced technology and its multi-application combined with a great price. Our previous pick, the Kenwood KAC-M1824BT, has been replaced by this one.

It’s not only suitable for your car but can also be installed on your motorcycle, ATV, and boat. This is possible because the amplifier is equipped with a conformal-coated main PCB which offers protection from outdoor moisture and salt from marine environments.

The Bluetooth connection allows you to operate your music wirelessly which is way more fun than using RAC input cables which can let you down at times.

Its compact size and water resistance properties make it really suitable for use in environments where amplifiers were not previously installed due to lack of space and the damage caused by exposure to environmental conditions.

It is waterproof and dustproof and comes with an IPX66/67 certification. The IPX66/67 certification enables it to perform even when exposed to water. This makes it suitable to operate on a boat, ATV, and motorcycle. It is tested for corrosion resistance against salt spray and salt fog under ASTM B117.

The SMART remote controls Bluetooth on and off functions, volume, skip tracks and EQ/Preout presets.

If an aftermarket unit without preamp output is used, the amplifier’s power wire is connected directly to the power line of the head unit. This is because this amplifier contains a signal-sensing turn-on feature that turns your amplifier on when a signal from the unit input is detected. This feature eliminates the need to install a turn-on lead to the amplifier’s power control wire.

Video Overview

5-Channel Pick

Power Acoustik RZ5‐2500 DSP

RMS: @ 2Ω 150W x 4 + 600W x 1;
@ 4Ω 100W x 4 + 400W x 1;
Bridged @ 4Ω 300W x 2 + 600W x 1 (2Ω)
Max: 2,500 Watts
No. of Channels: 5
Frequency Response: N/A
Size: 4.75” x 1.625” x 12.25”
Class: D

If you need more power with fine digital sound processing in your car, consider this 5-channel amp by Power Acoustik. It can power your two pairs of low-resistance speakers with 150 watts for each. You can simultaneously power a 600W sub from this Power Acoustik powerhouse.

The auto-tuning of its DSP is very convenient. You can configure it on your computer by connecting it via a USB connection. Moreover, you can tune it from your iOS and Android devices on the Razor DSP app through Bluetooth connections.

You can also use its Bluetooth connectivity to get high-level input from any BT-enabled device. Despite being such a powerful 5-channel unit, RZ5‐2500DSP boasts a compact chassis that makes its installation easy across different car models.

4-Channel Budget

Blaupunkt AMP1804BT

Power (RMS/ Peak): 150W x4 (at 2 ohms) and 100W x4 (at 4 ohms), 1600W
No. of Channels: 4
Frequency Response: 10 Hz – 30 kHz
Size: 3.8” x 1.8” x 6.7”
Class: D

This is another pocket-friendly option you can consider to upgrade your car sound with a wireless 4-channel amp. Blaupunkt has designed this amplifier so that it can easily fit into every type of car trunk and can work with all sorts of stereo systems.

We particularly like this budget amp because it is perfect for the right amount of sound improvement. It neither increases the loudness and bass reverbs too much nor does its sound fall underwhelming.

The other impressive bit about this Blaupunkt is its Bluetooth Connectivity. When many expensive amps don’t have the latest Bluetooth 5.0, Blaupunkt AMP1804BT features it despite being a low-priced amp option on the block.

Blaupunkt AMP1804BT video review + dyno test

4-Channel Budget

Soundstream ST4.1000DB

Power (RMS/ Peak): 125W x4 (at 2 ohms);
90W x4 (at 4 ohms);
250 watts x 2 bridged at 4 ohms
Max: 1000W
No. of Channels: 4
Frequency Response: 20 Hz – 30 kHz
Size: 3” x 1.5” x 7.75”
Class: D

Soundstream has designed this Bluetooth amp for all those car owners who need optimal efficiency and durability from the upgrade amplifier. Soundstream ST4.1000DB features a MOSFET power supply with IRTM transistors. Both these components ensure top-quality performance to satisfy the sound amplification requirements of any audiophile.

The amp also features a hybrid aluminum alloy heat sink. This dissipation channel ensures that you can use the amp nonstop without worrying about it getting overheated. Even if the amp gets overheated, its thermal and overload circuits protect it from any damage.

You don’t need to run a remote turn-on wire while installing it with your existing factory radio— thanks to its intuitive hi-level signal sensing turn-on. ST4.1000DB will automatically detect the incoming sound signal and will switch on/off on its own.

Soundstream ST4.1000DB video review

Top Notch 4-Channel

Massive Audio TX48

RMS: @2 Ohm 400W x 4;
@4 Ohm 200W x 4;
@4 Ohm Bridged 800W x 2
Max: 1600 W
No. of Channels: 4
Frequency Response: 10 Hz – 25 kHz
Size: 4.25” x 1.6” x 10.75”
Class: D

We are rounding out the list with this top-quality 4-channel amp by Massive Audio. It is one of those few Bluetooth amps that come with a certified resistance against moisture. It is an IP65 water-resistant amplifier— thanks to its black anodized brushed aluminum heat sink, nickel-plated RCA inputs, PCB with Dura-coated epoxy, and stainless steel caps.

This impressive construction allows you to use it in cars as well as ATVs, boats, and other marine vehicles. Even if your head unit doesn’t feature CarPlay or Android Auto, you can still use your phone as your music source, courtesy of TX48’s Bluetooth connectivity.

This amp lets you produce decent sound from four 200W speakers boasting high impedance. The produced sound will be louder and clearer than what your factor setup was used to produce. We also like this Massive audio amp for its built-in 5-way protection and noise reduction circuitries.

Everything else we recommend

5-Channel Also Great

Lanzar HTG558BT

RMS: 4 X 250W + 1 X 650W RMS @ 4 Ohms;
4 X 350W + 1 X 1,500W RMS @ 2 Ohms;
2 X 1,000W MAX @ 4 Ohms Bridged
Max: 4 X 500W + 1 X 2,000W MAX @ 4 Ohms
Class: AB
Channels: 5

The Lanzar HTG558BT has some remarkable features which are stated and discussed below. This amplifier has inbuilt Bluetooth technology which allows users to connect their devices and stream music from any platform.

The MOSFET power supply is an evolutionary technology for Bluetooth car amplifiers. MOSFET enables an amplifier to sustain the same required power output at a different voltage. Fitted with a 3-way protection circuitry that features protection from thermal, overload, and short circuits.

This amplifier features Chrome RCA connectors between the amplifiers and speakers which ensure distortion-free audio output. With the RCA jacks, you can add another amplifier easily by using the jack as the feed to the next amplifier instead of using splinter codes to distribute the signal to the next amplifier.

High End


RMS: @ 4 OHMS 45 W × 4 (FRONT/REAR), 90 W × 2 (SUBWOOFER);
@ 2 OHMS 175W × 2 (SUB) at 1 kHz, 600 W × 1 (SUBWOOFER bridged) at 1 kHz;
@ 2 OHMS 300 W × 2 (SUB), 1100 W × 1 (SUBWOOFER bridged)
Class: D
Channels: 6/5

This Sony high-end Bluetooth car amplifier has unmatched features which are discussed below.

As a Class D amplifier, it’s compact and can be fitted in your car without consuming much space. Class D amps are highly efficient in that they produce a lot of power without using much current and without thermal overload.

It’s fitted with a Wireless Bluetooth connection which allows you to connect your devices and stream your favorite music.

Sony XM-GS6DSP gives you remote control through Sony’s Music Centre application which is installed on your devices. Through this feature, you can adjust fader, your speaker levels, time alignment (optimizes sound for each seat), and a 10-band equalizer until it suits your personalized requirements.

The 6 channels available in this amp (see 8-channel options) are normally configured as follows. Channels 1 & 2 power tweeters, midranges or front speaks; Channels 3 & 4 power the woofers or the midranges; channels 5 & 6 can be bridged to run the subwoofer or can run in stereo to power the woofers.

It has a 3-way protective circuitry that turns off the amplifier when overheating, overloading, short circuit or DC Offset occurs.

It has a low boost circuitry for the subwoofer channel which can increase bass response.

Sony XM-GS6DSP is one of a few amplifiers with up to 6 channels that work totally fine with no music distortions. It’s one of a kind amplifier and you should totally check it out.

4-Channel Budget

Velex VX-505

Power (RMS/ Peak): 60W x4 (at 4 ohms), 800W
No. of Channels: 4
Frequency Response: 20 Hz – 20 kHz
Size: 4” x 2” x 7.8”
Class: D

Finding a weather-resistant Bluetooth 4-channel amp without straining your budget is like finding a needle in a haystack. However, if you are looking in the right direction, you can find one. Case in point: Velex VX-505. It is an 800W weather-resistant amp that is designed and constructed to withstand all sorts of rough and tough outdoor conditions.

Its PCB (circuit board) is conformal-coated, making it impervious to dust and moisture. Moreover, its overall hardware is made of stainless steel, making it fully corrosion-resistant. This type of quality construction also makes it a suitable option for ATVs and marine vehicles.

You can use this amp to power two pairs of quality high-impedance speakers with 60 watts. Having four 60W speakers powered by an amp that lets you connect wireless input is certainly a great improvement to any old stock stereo setup.

4-Channel Budget


Power (RMS/ Peak): 300W x4 (at 2 ohms) and 200W x4 (at 4 ohms), 2000W
No. of Channels: 4
Frequency Response: 10 Hz – 40 kHz
Size: 3.4” x 1.4” x 4.1”
Class: AB

This is a compact and budget Bluetooth 4-channel amp suitable for both road vehicles and marine installations. Its outer and internal construction is done to make it make exceedingly good against exposure to extreme moisture. Its low price makes its versatile use even better.

This Pyle Auto 4-Channel amp is also great because of its ease of use and installation. Its Bluetooth 2.0 allows you to use it with all sorts of BT-enabled devices. Moreover, its small footprint with integrated RCA cables makes its installation a breeze.

If you want to upgrade your factory sound without breaking the bank, you should consider this Pyle amplifier. Its marine-grade construction and wireless music streaming just further sweeten the deal.

4-Channel Also Great

Kicker 42PXI BT1002

Power (RMS/ Peak): 50W x4 (at 2 ohms) and 25W x4 (at 4 ohms), 200W
No. of Channels: 4
Frequency Response: 20 Hz – 20 kHz
Size: 3.43” x 1.625” x 7.17”
Class: D

If you are not chasing a very powerful amp but need something that can provide you good sound and replace your wonky factory head unit, consider this 4-channel amp by Kicker. The amp offers reasonable power output for four low-impedance speakers and subs. If you need regular sound, you can also plug it into high-impedance sound outputs.

The best thing about this Kicker amp is its Bluetooth connectivity, handy display, and remote. Apart from Bluetooth, you can connect all your handheld devices to the amp through USB and aux connections as well.

This Kicker amp is also a good investment due to its refined sound. Its selectable crossover along with a subsonic filter ensures that you can hear the meticulous sound you expect any top-of-the-line amp to produce.


BOSS Audio MC900B

RMS: 94 Watts x 4 RMS @4-Ohms
Max: 500 Watts @4-Ohms Max Power
Class: AB
Channels: 4

If you are on a tight budget or you want to spend as little as possible and still have a great Bluetooth amplifier for your car, the Boss MC900B will definitely do the trick.

Wherever you go the MC900B will be there to brighten your day with its Class AB amplification features. MC900B is an all-terrain amp meaning it can withstand external environmental exposure.

MC900B has aptX decoding installed which improves the quality of compressed music files stored on your devices.

The amp has Protection circuitry which turns it off in case a short circuit or thermal overload occurs. This constant monitoring of the conditions of your system keeps the amplifier and your whole car system safe.

Of course, it has a wireless Bluetooth connection that allows one device to connect and stream music from your favorite apps.

Bluetooth car amplifier FAQ

How do I add Bluetooth to the car amplifier?

While getting a Bluetooth amplifier is far easier and more effective, you can add Bluetooth to your car amplifier. First, choose a Bluetooth audio adapter like this one. Then, you will have to connect the devices using the RCA cables. Finally, use the pairing method specified by the adapter’s manufacturer to pair the devices and you’re good to go.

What does a Bluetooth car amplifier do?

The Bluetooth car amplifier allows you to connect the amplifier to any Bluetooth device (phone, tablet, etc.). This eliminates the need to purchase an additional car stereo receiver.

Are Bluetooth amplifiers any good?

Most users will say they are. Not only because of wireless streaming, but also because they are easy to set up, connect, and operate.

Last update on 2023-04-11 / Affiliate links / *Image Disclaimer: We use images/data from Amazon Product Advertising API solely on products that link to Amazon. On products with the "Price at Crutchfield" button, we use images/data from as per the partnership deal.

Hey, there mobile audio lovers! My name is Vincent Talbot, founder and chief editor at Ask any mobile audio fanatic, installer, or company rep what makes a good car speaker, sub, or amp, or, better yet, why he or she prefers a certain brand over another, and be prepared to endure a litany of opinions, viewpoints, and passion-fueled perspectives. To be honest, mobile audio shopping can be a daunting task without a guide, so I’ve assembled what I feel are the best products to consider to make things easier for you. More.

Why you should trust me?

Mobile audio is my passion, so before I put anything in front of you I exhaustively research a broad range of products, review all the available information on them and ultimately make a curated list of recommendations. As a result, I want this site to be a trusted resource that you can rely on and that is not rigged by brand sponsorship, so you can use this information when you are planning your new mobile audio upgrade.

We and our partners share information on your use of this website to help improve your experience.
Do not sell my info: